A/C COMPRESSOR 95200-55P10
One compressor, two nameplates: OE 95200-55P10 covers the Suzuki SX4 (2013-2022) and Vitara (2015 onward) applications listed in the specification table. Changhui builds the unit to the shared factory mounting and port configuration, so one stocked reference supports both model lines. For distributors, that means wider vehicle coverage per SKU, simpler ordering, and less slow-moving stock.





Key Features & Product Advantages
Shared-Platform Coverage:
Fits both the SX4 and Vitara applications listed, with the same mounting face, port orientation and connector used across the two nameplates.
Inventory Efficiency:
A single part number replaces several catalogue entries, helping wholesalers reduce duplicate stock and pick errors.
Consistent All-Season Cooling:
Variable displacement regulation keeps vent temperatures stable from cold starts to sustained high-speed motorway driving.
Low NVH Signature:
Precision-balanced internals and a rigid housing limit the vibration transmitted into the cabin of these compact crossovers.
Long-Life Sealing:
New shaft seals and port O-rings maintain system pressure through repeated seasonal A/C use.
Corrosion-Resistant Build:
Aluminium alloy construction withstands road salt, humidity and repeated engine-bay cleaning.
Batch-Traceable Testing:
Leak, pressure, clutch and noise checks are recorded for each unit and linked to its production batch.
Technical Specifications
|
Parameter |
Specification |
|
Product Type |
Automotive A/C Compressor |
|
OE / Reference Part Numbers |
95200-55P10 95200-55P10000 9520055P10 |
|
Vehicle Model |
Fit for SIX 2013-2022 Fit for VITARA 2015- |
|
Refrigerant |
R134a |
|
Voltage |
12V |
|
Pulley Grooves |
7PK |
|
Clutch Diameter |
125 mm |
|
Compressor Type |
Variable Displacement |
|
Material |
Aluminum Alloy |
|
Condition |
New |
|
Warranty |
12 Months |
|
Testing |
100% Tested |
Applications
For Suzuki SX4 2013-2022 and Vitara 2015-onward vehicles specifying OE 95200-55P10, 95200-55P10000 or 9520055P10. Because the two nameplates may use different auxiliary drive setups, confirm the part number and pulley configuration against the original unit or VIN before bulk ordering.
Why Partner with Changhui?
Changhui Group has manufactured automotive components since 1975 and works as a Tier-1 partner to more than 40 vehicle manufacturers. Shared-platform experience, MES traceability and automated inspection help us deliver consistent fitment across multiple model lines.
Certifications and Documentation: IATF 16949 and ISO 14001 certified plants, with EAC paperwork available for applicable export markets.
Simplified Logistics: One reference for several applications, protective export cartons and reliable scheduling for repeat container orders.
Installation & Usage Notes
Correct identification and a clean system are essential on shared-platform vehicles. These checks help the replacement perform as intended.
1. Confirm the Exact Reference and Pulley
Check the OE number stamped on the old unit and compare the pulley groove count and connector shape with the product photos before fitting.
2. Flush and Renew Consumables
If the previous compressor failed mechanically, flush the condenser and lines and inspect the expansion valve for debris.
Install a new receiver-drier; on shared-platform systems, the drier is often overlooked and causes repeat failures.
3. Replace All Opened Seals
Install new R134a-compatible O-rings at every disconnected joint and apply a small amount of the specified compressor oil for lubrication.
Do not reuse flattened, swollen or damaged seals. Even a minor leak can cause refrigerant loss and reduced cooling performance within a few weeks.
4. Adjust Oil, Evacuate and Recharge
Ensure the PAG oil quantity is properly balanced with the amount recovered. Fully evacuate the system and check that the vacuum remains stable.
Recharge the system with the specified R134a amount by weight, and document the refrigerant quantity on the workshop invoice.
5. Complete Final Performance and Leak Inspections
Check belt alignment and tension, clutch air gap and electrical connector security. Then measure the air vent temperature and high- and low-side pressures.
Before returning the vehicle, inspect every joint with an electronic leak detector and perform a short road test to confirm proper operation.
Company Profile


Main Business



Manufacture Capacity - Mold Manufacturing
- Specialized in the Design and Production of Stamping, Injection and Die-Casting Molds
- 57 Sets of Professional Mold Manufacturing Equipment
- Annual Output Exceeding 600 Sets of Molds

- 5 High-Speed SMT Manufacturing Lines
- Automated Solder Paste Printing and Reflow Soldering Processes
- Advanced Wave Soldering Equipment
- AOI Visual Inspection and KIC Temperature Monitoring
- High-Precision 3D Solder Paste Inspection
- Automated Product Assembly and Real-Time Online Quality Checks

- Dedicated ECU Motor Assembly and Manufacturing Line
- MES-Integrated Production Management and Traceability
- Core Components from Renowned Global Suppliers
- Automated Welding and Assembly Systems
- AOI-Based Welding Inspection and Quality Monitoring

Manufacture Capacity - EPS Manufacturing
- 3 Specialized Product Assembly Lines
- End-to-End MES Production Tracking and Traceability
- Automated In-Line Quality Inspection
- Fully Automated Industrial Cleaning Systems
- Intelligent 3D Automated Warehousing System

Quality Control
1. Rigorous Compressor Performance Testing
Before delivery, every compressor is thoroughly tested for pressure output, leakage, clutch engagement and operating noise to verify its overall performance and reliability.
2. Dimensional Accuracy and Batch Quality Inspection
Critical specifications, such as mounting dimensions, pulley run-out, assembly torque and lubricant levels, are regularly inspected and recorded to maintain consistent quality across production batches.
Certificates

Packing and Transpiration






Hot Tags: a/c compressor 95200-55p10, China a/c compressor 95200-55p10 manufacturers, suppliers
