A/C COMPRESSOR 95200-54PA0

A/C COMPRESSOR 95200-54PA0
Details:
Designed for later-generation Suzuki SX4 models (2016-2022), the Changhui compressor supplied under OE 95200-54PA0 restores factory cooling output as a genuine direct-fit replacement.
Send Inquiry
Description
Send Inquiry

A/C COMPRESSOR 95200-54PA0

 

Designed for later-generation Suzuki SX4 models (2016-2022), the Changhui compressor supplied under OE 95200-54PA0 restores factory cooling output as a genuine direct-fit replacement. Compact dimensions, matched port angles and the original connector shape make it a clean fit in the tightly packaged SX4 engine bay. It is a dependable service part for dealers and independent workshops handling vehicles beyond their warranty period.

95200-45PAO-AC compressor-connector
95200-45PAO-AC compressor-detail
95200-45PAO-AC compressor-front view
95200-45PAO-AC compressor-side view
95200-45PAO-AC compressor-top view
 

Key Features & Product Advantages

 

 

Made for the Later SX4:
Casing, bracket positions and hose ports align with the 2016-2022 layout, avoiding the clearance issues seen with universal-fit units.

Rapid Cabin Pull-Down:
Responsive displacement control delivers cool air quickly after the vehicle has been parked in direct sunlight.

Refined Noise Behaviour:
Tight machining tolerances and a balanced rotating group keep compressor hum and vibration out of the passenger compartment.

Secure Refrigerant Containment:
Fresh shaft and port seals reduce the slow leaks that typically develop on five-to-ten-year-old systems.

Efficient Heat Dissipation:
The aluminium alloy housing transfers heat away from the compression chamber, supporting stable output in summer traffic.

Modest Power Demand:
Low internal friction keeps the load on the small Suzuki engine low, with no noticeable effect on acceleration or fuel consumption.

Individually Function-Tested:
Pressure, leakage, clutch engagement and noise are checked on each compressor before protective packing.

 

 

Technical Specifications

 

Parameter

Specification

Product Type

Automotive A/C Compressor

OE / Reference Part Numbers

95200-54PA0

Vehicle Model

Fit for SX4 2016-2022

Fit for SX4 2018

Refrigerant

R134a

Voltage

12V

Pulley Grooves

7PK

Clutch Diameter

125 mm

Compressor Type

Variable Displacement

Material

Aluminum Alloy

Condition

New

Warranty

12 Months

Testing

100% Tested

 

 

Applications

 

For Suzuki SX4 2016-2022 (including 2018 models) applications specifying OE 95200-54PA0. Compare the number on the original compressor and the pulley/connector configuration with the product images before placing an order.

 

 

Why Partner with Changhui?

 

 

With manufacturing roots going back to 1975, Changhui Group is a Tier-1 partner to more than 40 vehicle manufacturers. In-house mould making, automated assembly and 100% end-of-line testing support consistent quality across our aftermarket compressor range.

Certified Production: IATF 16949 and ISO 14001 systems, with EAC documentation available for export destinations that require it.

Dealer-Friendly Supply: Brand-new stock, retail-ready protective packaging and short, predictable replenishment lead times.

 

 

 

 

Installation & Usage Notes

 

A few minutes of preparation before fitting will protect the compressor and preserve warranty cover. Ask your workshop to follow these steps.

1. Inspect the Unit on Arrival

Confirm the part number on the carton, check that the pulley turns freely by hand and look for shipping damage before the unit is installed.

 

2. Prepare and Flush the System

Have a qualified workshop recover the old refrigerant, then flush the circuit if the previous compressor failed internally.

Fit a new drier and replace every O-ring that was disturbed; dirty or moist refrigerant is the main enemy of a new compressor.

 

3. Match Oil Type and Volume

Use the R134a-compatible PAG oil specified for this Suzuki application, balancing the quantity against the oil drained from the old unit.

Do not use sealers, stop-leak additives or universal oils - they can restrict the expansion valve and void the warranty.

 

4. Deep Vacuum Before Charging

Evacuate the system for at least 30 minutes and verify the vacuum holds, which confirms there are no leaks and no moisture left.

Recharge by weight with the exact quantity on the under-bonnet label, then run the engine and cycle the clutch several times.

 

5. Check Drive, Connector and Results

Check belt tension, pulley alignment and the electrical connector, then measure vent temperature and both service-port pressures.

Complete a final electronic leak check and keep the workshop record together with the purchase invoice.

 

 

 

Company Profile

 

Company Profile

 

2

 

 

Main Business

 

Main Business

 

Products Automotive electronics series

 

Products Automotive electronics series2

 

 

 

Manufacture Capacity - Mold Manufacturing

 

  • Expertise in Stamping, Injection and Die Casting Mold Design and Manufacturing
  • Equipped with 57 Specialized Mold Processing Machines
  • Annual Production Capacity of Over 600 Mold Sets

 

Mold Manufacturing

 

  • 5 High-Performance SMT Production Lines
  • Automatic Solder Paste Printing and Reflow Soldering
  • Reliable Wave Soldering Equipment
  • AOI Quality Inspection and KIC Thermal Profiling
  • 3D Solder Paste Inspection Technology
  • Automated Product Assembly and Online Quality Control

 

Mold Manufacturing

 

  • Dedicated ECU Motor Production Line
  • Full-Process MES Traceability and Production Monitoring
  • Components from Globally Recognized Suppliers
  • Automated Welding and Assembly Operations
  • High-Precision AOI Welding Inspection System

 

Mold Manufacturing

 

 

Manufacture Capacity - EPS Manufacturing

 

  • 3 Dedicated Product Assembly Lines
  • MES-Based Full-Process Production Traceability
  • Automated Online Quality Inspection
  • Automatic Industrial Cleaning Systems
  • Fully Automated 3D Storage and Warehouse System

 

EPS Manufacturing

 

 

Quality Control

 

1. Comprehensive Performance Testing
Each compressor undergoes rigorous testing for pressure performance, sealing integrity, clutch operation and operating noise to ensure it meets quality requirements before shipment.

 

2. Precision and Batch Quality Control
Key parameters, including mounting dimensions, pulley run-out, assembly torque and lubricant levels, are inspected and documented through batch-level quality checks.

 

 

 

Certificates

Certificates

 

Packing and Transpiration

 

Packing and Transpiration

 

Packing and Transpiration3

 

3

 

Product Delivery

 

 

14

 

15

 

 

Hot Tags: a/c compressor 95200-54pa0, China a/c compressor 95200-54pa0 manufacturers, suppliers

Send Inquiry