Worn control arm bushings or a loose ball joint can lead to steering wheel vibration, clunking noises, and dangerous uneven tire wear. Our replacement control arm is a complete, ready-to-install solution for both the front left and front right positions. Made from high-strength sheet steel, this part meets strict OE standards for safety and reliability, ensuring a seamless fit and dependable performance for your vehicle.
Key Features
Direct Fit
Precision-engineered as a direct replacement for the original equipment.
All-in-One
Comes complete with a pre-installed ball joint and rubber bushings for a hassle-free installation.
High-Strength Steel
Robust sheet steel construction with a durable corrosion-resistant coating.
Precise Cone Size
Features the correct 18 mm cone size for a secure fit into the steering knuckle.
Technical Specifications
|
Specification |
Details |
|
OE Numbers |
4408958, 4412934 |
|
Placement on Vehicle |
Front Axle Left / Right |
|
Material |
Sheet Steel |
|
Length |
476 mm |
|
Cone Size |
18 mm |
|
Mounting Points Diameter |
10 mm |
|
Ball Joint Included |
Yes, Pre-Installed |
Structural Composition
Arm Body
Manufactured from high-strength sheet steel with a corrosion-resistant coating, designed to provide durable and reliable suspension performance.
Bushings
Pre-installed rubber bushings that effectively dampen road vibrations and reduce noise transmission to the vehicle interior.
Ball Joint
Integrated pinch-style ball joint, pre-greased and equipped with a protective dust boot to prevent contamination.
Mounting Hardware
Cone size 18 mm for precise fitment to steering components.
Compatible Vehicle Models
|
Make |
Model |
Years |
|
General Motors |
Various Models |
|
|
Opel / Vauxhall |
Vivaro, Astra, Zafira |
|
|
Renault |
Trafic, Megane |
|
|
Nissan |
Primastar |
|
Installation and Usage Notes
- This front lower control arm fits General Motors, Opel, Vauxhall, and Renault vehicles across multiple platforms. Verify the position (left or right) before installation.
- Before removal, apply penetrating oil to all mounting bolts, especially the ball joint pinch bolt and the two large bolts securing the arm to the subframe.
- To install, loosely fit the rear bushing bolt first. Then, use a floor jack to carefully raise the steering knuckle until the ball joint stud aligns with its mounting hole. Do not use force to drive the stud in, as this could damage the new ball joint or its rubber boot.
- Tighten all bolts to the specified torque only after the vehicle is lowered and its full weight is resting on the suspension (at ride height).
- Torque specifications (Reference): Ball joint pinch bolt to 48-65 ft-lbs (65-88 N·m); control arm mounting bolts to 76-96 ft-lbs (103-130 N·m). Always verify with a vehicle-specific service manual.
- After installation, a professional wheel alignment is mandatory.
FAQ Module
Q: Which vehicles is this control arm compatible with?
A: This front lower control arm fits General Motors, Opel, Vauxhall, Renault, and Nissan vehicles. OE cross references include 4408958, 4412934, 4418223, 91166462, 93851117, 93858141, 95523358, 5450300Q0A/B/G, and 8200054003.
Q: What are the physical specifications of this control arm?
A: Cone size: 18 mm. Material: Sheet steel. Placement: Front Axle Lower.
Q: What are the torque specifications?
A: Torque specifications (reference): Ball joint pinch bolt to 48-65 ft-lbs (65-88 N·m); control arm mounting bolts to 76-96 ft-lbs (103-130 N·m). Always verify with your vehicle-specific service manual.
Q: Is a wheel alignment necessary after installation?
A: Yes, a professional wheel alignment is mandatory after replacing this control arm.
Q: What brands are covered by these OE numbers?
A: These OE numbers cover General Motors, Opel, Vauxhall, Renault, Nissan, and related platforms.
Packaging and Shipping Module
- Product Packaging
Each control arm is carefully packaged to ensure its arrival intact:
Protective Packaging: The control arm is first wrapped in a moisture-proof bag to prevent corrosion during storage and transportation. This protects the metal surface from moisture and humidity.
Foam Lining: This foam acts as a shock absorber, cushioning the control arm from impacts and vibrations during transportation.
Sturdy Carton: The control arm is placed in a high-quality corrugated carton, with foam padding filling the gaps to ensure a tight fit and prevent movement within the packaging.
Carton Labeling: Each carton is labeled with the product's original manufacturer's number (545011KA0B or 54500-4EA0A), barcode, and basic product information for easy identification.
- Shipping Information
International Shipping: We ship worldwide through experienced and reliable freight companies specializing in automotive parts. International shipping times vary depending on the destination and the chosen mode of transport.
Bulk Orders: For wholesale or bulk orders, we offer pallet shipping options. We can calculate the approximate number of control arms that a standard 20ft, 40ft container, or 40ft high cube (40HQ) container can accommodate, thus optimizing shipping costs.
Shipping Insurance: We recommend purchasing shipping insurance for all orders to protect goods from loss or damage during transit.
Receiving and Inspecting Goods: Please inspect the package immediately upon receipt. If there is any damage to the outer packaging, please take photos before opening and contact us immediately.
Hot Tags: 4408958 4412934 4412934 control arm, China 4408958 4412934 4412934 control arm manufacturers, suppliers, 352800 Lower Ball Joint, 98AG3395AE Lower Ball Joint, Control Arm for VW Tiguan, Ford F150 2004 2008 Control Arm, Front Ball Joint Transit, VW Audi Front Control Arm
