This component (OE 3C0199231A) is a control arm mounting bracket, also known as an engine mount bracket. It secures the rear of the front lower control arm to the vehicle's subframe. On high-mileage Volkswagen vehicles, the bushing inside this bracket can wear out, causing play in the suspension, clunking noises, and poor handling . Replacing this bracket restores the rigid connection needed for proper suspension geometry.
Key Features
Direct OEM Replacement
- Designed to replace the original bracket, fitting both left and right side applications for versatility .
01
Eliminates Suspension Play
- Replaces the worn bracket to remove play between the control arm and the subframe, improving handling and stability .
02
Resolves Common Issues
Directly addresses common symptoms like clunking noises over bumps, poor handling, and difficulty aligning the vehicle .
03
High-Quality Construction
- Manufactured to meet strict quality standards, ensuring a reliable fit and long service life.
04
Includes Bushing
- This bracket typically comes with the necessary bushing pre-installed, ready to bolt into place.
05
Technical Specifications
| Specification | Details |
| OE Numbers | 3C0199231A, 3C0199231B, 3C0199231D, 3C0199231E |
| Product Type | Control Arm Mounting Bracket / Engine Mount Bracket |
| Position | Front Lower, Left or Right Side |
| Function | Secures control arm to subframe, reduces vibrations |
| Fits Models | CC, Passat, Passat Wagon, Tiguan, Tiguan Limited |
Structural Composition
Bracket Body
- A sturdy steel mounting bracket designed to provide a rigid connection point, securing the rear of the front control arm to the vehicle subframe.
Integrated Bushing
- Contains a pre-installed rubber bushing that allows for controlled movement while damping vibrations and preventing metal-to-metal contact.
Mounting Flanges
- Features precision-positioned bolt holes for secure attachment to both the control arm and the subframe, ensuring proper suspension alignment.
Compatible Vehicle Models
| Make | Model | Years |
| Nissan | Juke | 2011, 2012, 2013, 2014, 2015, 2016, 2017 |
| Nissan | Leaf | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| Nissan | Sentra | 2017, 2018, 2019 (Nismo, SR Turbo only) |
Installation and Usage Notes
- This control arm mounting bracket secures the rear of the front control arm to the subframe. Verify fitment for Volkswagen Passat (2006-2010), CC (2006-2010), and Tiguan (2009-2018) before installation.
- The bushing inside the bracket is a common wear item on high-mileage vehicles. Inspect the new bracket bushing to ensure it's intact and properly seated before proceeding.
- Apply penetrating oil to all mounting bolts prior to removal, as they may be seized, especially in rust-prone regions.
- Install all bracket bolts loosely first. After positioning, tighten them to the manufacturer's specified torque with the vehicle's weight resting on the suspension (at ride height) to prevent premature bushing failure.
- Torque specifications (Reference): Control arm bracket mounting bolts to 70-85 ft-lbs (95-115 N·m). Always verify with a vehicle-specific service manual.
- A professional wheel alignment is strongly recommended after replacing this component to ensure correct suspension geometry.
- After installation, perform a test drive at low speed, paying attention for any clunking noises over bumps, which should be eliminated by a properly installed bracket.
- Note: This bracket fits both left and right side applications.
FAQ
• OE: 54500-4EA0A
• Q: What vehicles are these control arms compatible with?
• A: OE 54500-4EA0A is the front right (passenger side) lower control arm for Nissan Juke (2011-2017). Both are designed as direct OEM replacements .
• Q: Do these control arms come with ball joints and bushings pre-installed?
• A: Yes, this control arm is complete assemblies that include pre-installed ball joints and rubber bushings. This all-in-one design saves installation time and labor compared to pressing out old components .
• Q: What is the expected lifespan of these control arms?
• A: Lifespan varies depending on driving conditions, road quality, and vehicle usage. Some users have reported that bushings may show wear sooner than expected under demanding conditions . Regular inspection during routine maintenance is recommended.
•
• Q: How do I know if my control arm needs replacement?
• A: Common symptoms include: clunking or knocking noises from the front suspension, uneven tire wear, vehicle pulling to one side, vibration in the steering wheel, and loose or wandering steering feel.
• Q: Do I need a wheel alignment after installation?
• A: Yes, a professional wheel alignment is mandatory after replacing any control arm to restore proper suspension geometry and prevent uneven tire wear .
• Q: Do these control arms include all necessary mounting hardware?
• A: Yes, both control arms come with the required mounting bolts and hardware for complete installation .
• Q: Will replacing these control arms fix my vehicle's clunking noise?
• A: If the clunking noise is caused by worn control arm bushings or ball joints, replacement should resolve the issue. However, other suspension components (sway bar links, struts, tie rods) can also cause similar noises.
• Q: What is the difference between stamped steel and forged aluminum control arms?
• A: This control arm is constructed from Forged Aluminum. Forged Aluminum arms (like those on some luxury vehicles) are lighter but typically more expensive.
Packaging and Shipping Module
- Product Packaging
Each control arm is carefully packaged to ensure its arrival intact:Protective Packaging: The control arm is first wrapped in a moisture-proof bag to prevent corrosion during storage and transportation. This protects the metal surface from moisture and humidity.Foam Lining: This foam acts as a shock absorber, cushioning the control arm from impacts and vibrations during transportation.Sturdy Carton: The control arm is placed in a high-quality corrugated carton, with foam padding filling the gaps to ensure a tight fit and prevent movement within the packaging.Carton Labeling: Each carton is labeled with the product's original manufacturer's number (545011KA0B or 54500-4EA0A), barcode, and basic product information for easy identification.
- Shipping Information
International Shipping: We ship worldwide through experienced and reliable freight companies specializing in automotive parts. International shipping times vary depending on the destination and the chosen mode of transport.Bulk Orders: For wholesale or bulk orders, we offer pallet shipping options. We can calculate the approximate number of control arms that a standard 20ft, 40ft container, or 40ft high cube (40HQ) container can accommodate, thus optimizing shipping costs.Shipping Insurance: We recommend purchasing shipping insurance for all orders to protect goods from loss or damage during transit.Receiving and Inspecting Goods: Please inspect the package immediately upon receipt. If there is any damage to the outer packaging, please take photos before opening and contact us immediately.
Hot Tags: control arm 3c0199231a, China control arm 3c0199231a manufacturers, suppliers
