1K0407152P Control Arm

Control Arm 1K0407152P

The lower control arm is essential for maintaining your vehicle's wheel alignment and absorbing road impacts. The OE numbers 1K0407152P and 1K0407152M are specific to the Front Right (Passenger Side) position. Our control arm is manufactured from robust Cast Iron using a casting/forged process, offering superior strength and durability compared to stamped steel alternatives. This unit is powder-coated to provide maximum rust and corrosion resistance, guaranteeing a long service life.

• Perfect Fit: A direct, non-adjustable replacement for the front right (passenger) side.
• Superior Material: High-strength Cast Iron construction provides exceptional rigidity and resistance to flex.
• Corrosion Resistant: Finished with a durable powder-coating to withstand harsh road conditions.
• Easy Installation: Includes a press-in end type for the bushings, designed for a straightforward replacement.

• Arm Body: Cast iron construction with powder-coated black finish for exceptional durability and corrosion resistance.
• Arm Type: Casting/Forged construction providing structural rigidity under dynamic loads.
• Bushings: Includes pre-installed rubber bushings (black) with 14.3 mm inside diameter, 92 mm length, and 39.6 mm outside diameter.
• Ball Joint Interface: Welded ball joint mounting point with threaded stud accommodation-ball joint must be transferred or purchased separately.
• Precision Dimensions: Length 262.5 mm with press-in end type for proper suspension alignment.

Safety First: Always disconnect the battery and support the vehicle on jack stands before working on the suspension.

Ball Joint Note: This is the control arm only; the ball joint may need to be transferred from your old arm or purchased separately if damaged.

Torque Specifications (Reference): Tighten the mounting bolts to 60-80 N·m and the ball joint nut to 40-54 N·m. Always verify torque values with a factory service manual for your specific vehicle.

Critical Step: Tighten all hardware to final torque only after the vehicle is lowered to the ground (at ride height).

Post-Installation: A professional wheel alignment is MANDATORY after replacing any control arm.

Product Packaging

Each control arm is carefully packaged to ensure its arrival intact:

Protective Packaging: The control arm is first wrapped in a moisture-proof bag to prevent corrosion during storage and transportation. This protects the metal surface from moisture and humidity.

Foam Lining: This foam acts as a shock absorber, cushioning the control arm from impacts and vibrations during transportation.

Sturdy Carton: The control arm is placed in a high-quality corrugated carton, with foam padding filling the gaps to ensure a tight fit and prevent movement within the packaging.

Carton Labeling: Each carton is labeled with the product's original manufacturer's number (545011KA0B or 54500-4EA0A), barcode, and basic product information for easy identification.

Shipping Information

International Shipping: We ship worldwide through experienced and reliable freight companies specializing in automotive parts. International shipping times vary depending on the destination and the chosen mode of transport.

Bulk Orders: For wholesale or bulk orders, we offer pallet shipping options. We can calculate the approximate number of control arms that a standard 20ft, 40ft container, or 40ft high cube (40HQ) container can accommodate, thus optimizing shipping costs.

Shipping Insurance: We recommend purchasing shipping insurance for all orders to protect goods from loss or damage during transit.

Receiving and Inspecting Goods: Please inspect the package immediately upon receipt. If there is any damage to the outer packaging, please take photos before opening and contact us immediately.

Hot Tags: 1k0407152p control arm, China 1k0407152p control arm manufacturers, suppliers