The outer tie rod end acts as the pivot point for your front wheels. As a crucial part of the steering linkage, it must be in perfect condition. Common symptoms of a worn tie rod end include a "clunk" when hitting bumps, a loose steering feel, and "feathering" or cupping on your tires. This premium replacement part is manufactured to restore your Toyota's factory-fresh steering feel and ensure your suspension geometry is accurate.
Key Features
Exact Fitment
Precisely engineered as a direct replacement for the factory tie rod end.
Durable Build
Constructed from high-strength materials for long-lasting reliability.
Perfect Threading
Features an M15x1.5 thread for a secure and precise fit.
Complete Kit
Includes the necessary castle nut and cotter pin for installation.
Technical Specifications
|
Specification |
Details |
|
OE Numbers |
45046-09570, 45046-19405, 45046-19415 |
|
Placement on Vehicle |
Front Axle Right (Outer) |
|
Thread Size |
M15x1.5 |
|
Thread Type |
Right-Hand Thread, Internal Thread |
|
Weight |
Approx. 0.726 kg |
Structural Composition
Outer Body
Forged steel housing with right-hand thread orientation.
01
Ball Stud
Hardened steel ball stud with a precise taper for secure fitment.
02
Dust Boot
Grease-filled rubber boot to protect internal components.
03
Mounting
Includes castle nut and cotter pin for secure installation.
04
Thread Size
M15x1.5.
05
Compatible Vehicle Models
|
Make |
Model |
Chassis Code |
|
Toyota |
Auris |
E15, E18 |
|
Toyota |
Corolla |
E15, E18 |
|
Toyota |
Prius |
W4 |
Installation and Usage Notes
- This outer tie rod end fits Toyota Auris (E15/E18), Corolla (NDE150/NRE150/NDE180/NRE180), and Prius (W4). Verify position and fitment before installation.
- Apply penetrating oil to all nuts and bolts before removal.
- Count the number of turns required to remove the old tie rod end and install the new one with the same number of turns as a baseline alignment reference.
- Torque specifications (Reference): Jam nut to 35-40 ft-lbs (47-54 N·m); ball joint stud nut to 30-35 ft-lbs (40-47 N·m). Always verify with a vehicle-specific service manual.
- After installation, a professional wheel alignment is mandatory.
- Replace in pairs for even wear and consistent handling.
FAQ Module
Q: Which vehicles is this tie rod end compatible with?
A: This component fits Toyota Auris (E15/E18), Corolla (NDE150/NRE150/NDE180/NRE180), and Prius (W4). Also fits Corolla models from 2007 onward.
Q: What are the OE cross references?
A: OE numbers include 45046-09570, 45046-19405, and 45046-19415. For the left side, refer to OE 45047-09270 or 45047-19205.
Q: What are the physical specifications?
A: Thread Size: M15x1.5. Placement: Front Axle Right.
Q: Is a wheel alignment required after replacement?
A: Yes, a professional wheel alignment is mandatory after replacing tie rod ends to ensure proper toe settings.
Q: Does this part come with mounting hardware?
A: This tie rod end typically includes the castle nut and cotter pin.
Packaging and Shipping Module
- Product Packaging
Each control arm is carefully packaged to ensure its arrival intact:
Protective Packaging: The control arm is first wrapped in a moisture-proof bag to prevent corrosion during storage and transportation. This protects the metal surface from moisture and humidity.
Foam Lining: This foam acts as a shock absorber, cushioning the control arm from impacts and vibrations during transportation.
Sturdy Carton: The control arm is placed in a high-quality corrugated carton, with foam padding filling the gaps to ensure a tight fit and prevent movement within the packaging.
Carton Labeling: Each carton is labeled with the product's original manufacturer's number (545011KA0B or 54500-4EA0A), barcode, and basic product information for easy identification.
- Shipping Information
International Shipping: We ship worldwide through experienced and reliable freight companies specializing in automotive parts. International shipping times vary depending on the destination and the chosen mode of transport.
Bulk Orders: For wholesale or bulk orders, we offer pallet shipping options. We can calculate the approximate number of control arms that a standard 20ft, 40ft container, or 40ft high cube (40HQ) container can accommodate, thus optimizing shipping costs.
Shipping Insurance: We recommend purchasing shipping insurance for all orders to protect goods from loss or damage during transit.
Receiving and Inspecting Goods: Please inspect the package immediately upon receipt. If there is any damage to the outer packaging, please take photos before opening and contact us immediately.
Hot Tags: 45046-09570 45046-19405 stabilizer link, China 45046-09570 45046-19405 stabilizer link manufacturers, suppliers, 1K0505323H Control Arm, 48520 2710R Stabilizer Link, BMW 116i 118i Coil Spring, BMW 328i 335i Front Link, Ford Transit Ball Joint, XC90 2002 2014 Ball Joint
