Your vehicle's stabilizer bar reduces body roll when cornering, and the stabilizer links are the pivot points that make this possible. When the ball joints in these links wear out, you'll hear a distinct clunking noise every time you hit a pothole, speed bump, or turn into a driveway. Our premium replacement link is built to original equipment standards, providing a precise fit and restoring your Hyundai or Kia's suspension performance.
Key Features
OEM Quality
Manufactured to meet or exceed the fit, form, and function of the factory part.
Direct Fit:
A straightforward bolt-on replacement for both the front or rear position, depending on the model.
Durable Boots
Includes high-quality rubber dust boots to keep contaminants out of the ball joints.
Restores Ride
Eliminates annoying suspension noises and reduces excessive body roll.
Technical Specifications
|
Specification |
Details |
|
OE Numbers |
54830-2H100 |
|
Placement on Vehicle |
Front or Rear Axle |
|
Part Type |
Anti-Roll Bar / Stabilizer Bar Link |
Structural Composition
Outer Body
Forged steel housing with corrosion-resistant finish.
01
Ball Joints
Two integrated ball joints (one at each end) that allow for articulation during suspension movement.
02
Dust Boots
Grease-filled rubber boots at both ends to protect internal ball joints from contaminants.
03
Link Length
Precision-engineered to OE geometry for proper anti-roll bar function.
04
Application
Connects the stabilizer bar to the front or rear strut/control arm.
05
Compatible Vehicle Models
|
Make |
Model |
Years |
|
Hyundai |
Various Models (Please verify fitment) |
|
|
Kia |
Various Models (Please verify fitment) |
|
Installation and Usage Notes
- This stabilizer link is designed for select Hyundai and Kia vehicles. Always verify fitment with your specific vehicle before installation.
- Apply penetrating oil to the stabilizer link nuts before removal, as they are often seized-especially in rust-prone regions.
- Remove both the upper and lower nuts, then remove the old link. Compare the length of the old link with the new one-they should match.
- Torque specifications (Reference): Stabilizer link nuts to 30-35 ft-lbs (40-47 N·m). Always use new self-locking nuts during installation.
- A professional wheel alignment is not typically required after stabilizer link replacement unless other suspension work was performed, but checking alignment is recommended.
- Replace in pairs (both left and right sides) for balanced handling and even wear.
- Inspect the stabilizer bar bushings while replacing the links-they often wear simultaneously and should be replaced if damaged.
FAQ Module
Q: Which vehicles is this stabilizer link compatible with?
A: This stabilizer link is designed for select Hyundai and Kia vehicles. Always verify fitment with your specific vehicle before ordering.
Q: What are the symptoms of a worn stabilizer link?
A: Common symptoms include clunking or rattling noises from the suspension when going over bumps, poor handling, excessive body roll during cornering, and reduced vehicle stability.
Q: Should I replace stabilizer links in pairs?
A: Yes, it is strongly recommended to replace stabilizer links in pairs (both left and right sides) for balanced handling and even wear.
Q: Is a wheel alignment required after replacement?
A: A professional wheel alignment is not typically required after stabilizer link replacement unless other suspension work was performed, but checking alignment is recommended.
Q: Can I replace stabilizer links myself?
A: Yes, stabilizer link replacement is a moderate DIY task with basic hand tools. However, a torch or penetrating oil may be required to remove rusted nuts.
Packaging and Shipping Module
- Product Packaging
Each control arm is carefully packaged to ensure its arrival intact:
Protective Packaging: The control arm is first wrapped in a moisture-proof bag to prevent corrosion during storage and transportation. This protects the metal surface from moisture and humidity.
Foam Lining: This foam acts as a shock absorber, cushioning the control arm from impacts and vibrations during transportation.
Sturdy Carton: The control arm is placed in a high-quality corrugated carton, with foam padding filling the gaps to ensure a tight fit and prevent movement within the packaging.
Carton Labeling: Each carton is labeled with the product's original manufacturer's number (545011KA0B or 54500-4EA0A), barcode, and basic product information for easy identification.
- Shipping Information
International Shipping: We ship worldwide through experienced and reliable freight companies specializing in automotive parts. International shipping times vary depending on the destination and the chosen mode of transport.
Bulk Orders: For wholesale or bulk orders, we offer pallet shipping options. We can calculate the approximate number of control arms that a standard 20ft, 40ft container, or 40ft high cube (40HQ) container can accommodate, thus optimizing shipping costs.
Shipping Insurance: We recommend purchasing shipping insurance for all orders to protect goods from loss or damage during transit.
Receiving and Inspecting Goods: Please inspect the package immediately upon receipt. If there is any damage to the outer packaging, please take photos before opening and contact us immediately.
Hot Tags: 54830-2h100 stabilizer link, China 54830-2h100 stabilizer link manufacturers, suppliers, 6R0411105AD Coil Spring, 6R0411105AD Front Spring, BMW 116i 118i Coil Spring, BMW 2006 2011 Stabilizer Link, Ford Transit Ball Joint, XC90 2002 2014 Ball Joint
