Power Steering Pump 571002E000
The 57100-2E000 Power Steering Pump, also known as 571002E000 571000L000 Power Steering Pump, 571002E000Power Steering Pump for HYUNDAI, 571002E000 Power Steering Pump for KIA and 571002E000 571000L000 Power Steering, is an OE-specification hydraulic vane pump designed for Hyundai and Kia hydraulic power steering systems. Driven by the engine through a V-ribbed belt, the pump continuously supplies pressurized hydraulic fluid to the steering gear, providing smooth steering assistance, precise steering response, and reduced steering effort under a wide range of driving conditions.
Manufactured to OE specifications, this power steering pump features a precision-machined vane rotor, integrated flow-control valve, high-strength aluminum alloy housing, and premium sealing components to ensure stable hydraulic pressure, low operating noise, and long service life. Designed as a direct replacement for the original equipment unit, it restores the vehicle's original steering performance and driving
Key Features
OE-quality replacement for OEM 57100-2E000
Hydraulic vane pump design
Provides stable hydraulic pressure for smooth steering assistance
High-strength aluminum alloy housing
Precision-balanced rotor for reduced vibration and operating noise
Premium shaft sealing system for superior leak resistance
Factory pressure-tested and leak-tested before shipment
Direct OE replacement for easy installation
Long service life and reliable performance
Technical Specifications
|
Item |
Specification |
|
Product Model |
57100-2E000 |
|
Pump Type |
Vane Pump |
|
Operating Mode |
Hydraulic |
|
Drive Type |
Serpentine Belt |
|
Pulley |
With Belt Pulley |
|
Pulley Diameter |
107 mm |
|
Number of Ribs |
3 |
|
Operating Pressure |
90 bar |
|
Housing Material |
Aluminum Alloy |
Structural Composition
● Pump Housing
High-strength die-cast aluminum alloy housing provides excellent rigidity, corrosion resistance, and efficient heat dissipation.
● Rotor and Vane Assembly
Precision-machined rotor and sliding vanes generate stable hydraulic pressure with high volumetric efficiency.
● Cam Ring
Optimized cam profile improves pumping efficiency while minimizing internal wear.
● Flow Control Valve
Maintains stable hydraulic flow over varying engine speeds to ensure consistent steering assistance.
● Pressure Relief Valve
Integrated pressure-relief valve protects the steering hydraulic system from excessive pressure.
● Drive Shaft Assembly
Transfers engine torque efficiently to the internal pumping mechanism.
● Bearing Assembly
High-quality bearings reduce friction and ensure smooth, reliable operation.
● Shaft Seal System
Premium sealing components effectively prevent hydraulic fluid leakage and maintain stable operating pressure.
● Hydraulic Ports
OE-standard inlet and outlet ports provide direct compatibility with the original hydraulic steering system.
Compatible Vehicle Models
|
Brand |
Model |
Year Range |
|
Hyundai |
Tucson (JM) |
2004–2010 |
|
Kia |
Sportage (JE/KM) |
2005–2010 |
Note: Compatibility may vary depending on engine type, steering system manufacturer, and production market. Always verify compatibility using the VIN number and OEM part number before installation
Installation and Usage Notes
Disconnect the vehicle battery before installation.
Inspect the steering rack, hydraulic hoses, reservoir, and fittings for contamination or wear.
Flush the hydraulic steering system if the previous pump has failed internally.
Fill the system only with the power steering fluid specified by the vehicle manufacturer.
Tighten all hydraulic fittings according to OE torque specifications.
Bleed the steering system thoroughly after installation to remove trapped air.
Check for hydraulic leaks and abnormal operating noise.
Verify proper steering assistance during the initial road test.
Recheck the hydraulic fluid level after the first test drive.
Always confirm compatibility using the VIN number and OEM part number before installation.
FAQ
Q: Who are we?
A: We are based in Shanghai, China, start from 2004,sell to Domestic Market(55.00%),North America(10.00%),Central
America(10.00%),South America(7.00%),Eastern Europe(4.00%),Mid East(4.00%),Western Europe(4.00%),Southeast Asia(2.00%),Eastern
Asia(1.00%),Southern Europe(1.00%),Northern Europe(1.00%),Africa(1.00%). There are total about 1000+ people in our office.
Q: How can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: What can you buy from us?
A: Auto Electrical Systems,Auto Engine Systems,Auto Steering Systems,Auto Suspension Systems,Auto Transmission Systems
Q: Why should you buy from us not from other suppliers?
A: Changhui group has over 4 0 years' experience in manufacturing auto electrics & electronics, has QC and OEM service capability. 40 years' industry professional accumulation made it to be automotive expert in auto electrics, electronics & EPS.
Q: What services can we provide?
A: Accepted Delivery Terms: FOB,CIF,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,German,French,Russian,Korean
Hot Tags: 571002e000 power steering pump, China 571002e000 power steering pump manufacturers, suppliers
