Power Steering Pump 56110PLA013
The 56110-PLA-013 Power Steering Pump, also known as 56110PLA013 Power Steering Pump, 56110PLA013 Power Steering Pump for HONDA CIVIC, 56110PLA013 for ACURA EL HONDA and 56110PLA013 Power Steering Pump for HONDA, is an OE-specification hydraulic vane pump designed for Honda hydraulic power steering systems. Driven by the engine through a serpentine belt, the pump continuously supplies pressurized hydraulic fluid to the steering gear, providing smooth steering assistance, reduced steering effort, and stable vehicle handling under all driving conditions.
Manufactured to OE standards, this power steering pump features a precision-machined vane rotor, integrated flow-control and pressure-relief valve, high-strength aluminum housing, and premium sealing components to ensure stable hydraulic output, low operating noise, and extended service life. Designed as a direct replacement for the original equipment unit, it restores the original steering performance and driving comfort. The original Honda part 56110-PLA-013 has been superseded by 56110-PLA-033.
Key Features
OE-quality replacement for OEM 56110-PLA-013
Superseded by OEM 56110-PLA-033
Hydraulic vane pump design
Integrated pressure relief and flow control valve
Provides stable hydraulic pressure for consistent steering assistance
Precision-balanced rotor for reduced vibration and operating noise
High-strength aluminum alloy housing
Premium shaft sealing system for leak prevention
Factory pressure-tested and leak-tested before shipment
Direct OE replacement for easy installation
Technical Specifications
|
Item |
Specification |
|
Product Model |
56110-PLA-013 |
|
Pump Type |
Vane Pump |
|
Operating Mode |
Hydraulic |
|
Drive Type |
Serpentine Belt |
|
Pulley |
Without Belt Pulley |
|
Reservoir |
Without Reservoir |
|
Rotation Direction |
Counterclockwise |
|
Operating Pressure |
90 bar |
|
Housing Material |
Aluminum Alloy |
|
Valve Type |
Integrated Pressure Relief Valve |
Structural Composition
●Pump Housing
High-strength die-cast aluminum housing provides excellent rigidity, corrosion resistance, and heat dissipation.
● Rotor and Vane Assembly
Precision-machined rotor and sliding vanes generate stable hydraulic pressure with high volumetric efficiency.
● Cam Ring
Optimized cam profile ensures smooth hydraulic output while minimizing internal wear.
● Pressure Relief Valve
Integrated pressure relief valve protects the steering system from excessive hydraulic pressure.
● Flow Control Valve
Maintains consistent hydraulic flow to ensure stable steering assistance at different engine speeds.
● Drive Shaft Assembly
Transfers engine torque to the rotor assembly for continuous hydraulic fluid circulation.
● Bearing Assembly
Low-friction bearings provide smooth operation and extended service life.
● Shaft Seal System
Premium sealing components prevent hydraulic fluid leakage and maintain system pressure.
● Hydraulic Ports
OE-standard inlet and outlet ports ensure direct compatibility with the original steering system.
Compatible Vehicle Models
|
Brand |
Model |
Year Range |
|
Honda |
Civic VII Sedan (ES) |
2001–2005 |
|
Honda |
Civic VII Coupe (EM2) |
2001–2005 |
|
Honda |
Stream (RN1 / RN2) |
2001–2006 |
Note: Compatibility varies depending on engine type and market specification. This pump is commonly used on 1.6L and 1.7L gasoline engines (D16V1, D17A series). Always verify compatibility using the VIN number and OEM part number before installation.
Installation and Usage Notes
Disconnect the vehicle battery before installation.
Inspect the steering rack, hoses, reservoir, and fittings for wear or contamination.
Flush the hydraulic steering system if the previous pump has failed internally.
Use only the power steering fluid specified by Honda.
Tighten all hydraulic fittings according to OE torque specifications.
Bleed the steering system thoroughly after installation to remove trapped air.
Check for hydraulic leaks and abnormal operating noise.
Verify steering assistance during the initial road test.
Recheck the hydraulic fluid level after the first test drive.
FAQ
Q: Who are we?
A: We are based in Shanghai, China, start from 2004,sell to Domestic Market(55.00%),North America(10.00%),Central
America(10.00%),South America(7.00%),Eastern Europe(4.00%),Mid East(4.00%),Western Europe(4.00%),Southeast Asia(2.00%),Eastern
Asia(1.00%),Southern Europe(1.00%),Northern Europe(1.00%),Africa(1.00%). There are total about 1000+ people in our office.
Q: How can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: What can you buy from us?
A: Auto Electrical Systems,Auto Engine Systems,Auto Steering Systems,Auto Suspension Systems,Auto Transmission Systems
Q: Why should you buy from us not from other suppliers?
A: Changhui group has over 4 0 years' experience in manufacturing auto electrics & electronics, has QC and OEM service capability. 40 years' industry professional accumulation made it to be automotive expert in auto electrics, electronics & EPS.
Q: What services can we provide?
A: Accepted Delivery Terms: FOB,CIF,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,German,French,Russian,Korean
Hot Tags: 56110pla013 power steering pump, China 56110pla013 power steering pump manufacturers, suppliers
